Concrete Driveway

Concrete Driveway Installation Basics

»Posted by on Jul 3, 2019 in Concrete Driveway | 0 comments

If you’re thinking of constructing a concrete driveway, then you’re at the right track. Concrete is a fairly strong and durable material for driveways, not to mention affordable too. What’s more, you also have several options when it comes to improving its surface finish.  

To get the most out of the project, ensure that you hire the concrete driveway installers in your area. These experts know the steps of preparing the site properly and installing the concrete professionally. It’s also very important to let the concrete cure adequately. Here are the other things that you should know: 

  1. Maintenance

It is true that concrete driveways are so durable that it requires minimal maintenance. To maintain it, you only need to do occasional scrubs and annual resealing. Ask your concrete driveway contractors on how to improve weather resistance and prevent concrete staining. Concrete driveways that are maintained and installed correctly may last anywhere from 25 to 50 years. 

  1. Cost

It’s not too expensive to install a concrete driveway, although admittedly, there are cheaper ways to go about the project. Concrete driveway installation costs just right, a little more expensive than a gravel driveway but less expensive thanExpect to spend between $4 and $10 for every square foot. It all boils down to the complexity of the job, outdoor conditions, how easily available the materials are, and the decorative finish, if any, that you prefer.   

  1. Technical specifications

When installing concrete driveways, it is important that you check what the local code requires. Specifically, check the measurements and compressive strength required. It is usually the job of the concrete contractor to request for all the permits needed to start a concrete driveway installation. If you only need a single car driveway, then an 8 feet x 9 feet area is sufficient. If you need a two-car driveway, then it should be at least 15 feet x 18 feet car.  

  1. Site preparation

If you want to install concrete, then you have to realize that it requires thorough preparation. This means that you have to clear the entire area of plants or vegetation. Frames or wooden forms should be installed along the edges. The base of the driveway should be compacted gravel. Doing all these assures that your concrete driveway is well-drained and level.   

  1. Concretemix 

Only after the site has been prepared you can pour the concrete mix on the driveway. To determine how much, you’ll need the measurement of the entire area and the thickness of the slab have to be considered. If you need help in getting an accurate estimate, hire experienced concrete driveway installers to help you out.   

  1. Curingprocess

Laying the concrete isn’t when the job is done. You should also wait for the concrete to cure or set up. Give your new driveway a week before using it, and wait a full month before sealing it or parking large cars on itSpray the concrete every so often with water using a garden hose during the process of curing to keep it moist, but only when the weather is warm outside.  

read more